ASME SA285 Grade C steel plate supplier

 ASME SA285 Grade C

 1.Pressure Vessel Steel ASME SA285 ASME SA285 Grade C

 Fabricators use 2.ASME SA285 Grade C in the production of steel pressure vessels and boilers for non-critical service. ASME SA285 Grade C is a low to intermediate tensile strength pressure vessel grade steel. Used in the fabrication of pressure vessels and boiler tanks, SA285 Grade C should not be considered for high-pressure applications.

3.The material has good weldability under conventional methods using fusion welding. Plates supplied to this standard are normally delivered ‘as rolled’ unless otherwise specified.

4.We can ship ASME SA285 Grade C plates from stock to destinations worldwide. Please refer to the technical information below…

 Table 1: Chemical & Mechanical Values for ASME SA285 Grade C

Grade C Si Mn P S Al Cr Cu Ni Mo Nb Ti V Tensile
N/mm²
Yield/min
N/mm²
SA285Gr.C 0.16 0.35 0.4/1.2 0.03 0.03 0.02 0.3 0.3 0.3 0.08 0.01 0.03 0.02 360/480 235

 (Maximum values unless stated otherwise. Yield value is minimum)

 (Please note: the technical information above is for guidance only – for exact specifications, please check with our Sales Team)

 To find out more about ASME SA285 Grade C and receive a competitive quotation, please  contact our Sales Team.